What’s the Real Cost of Installing an EV Charger at Home in Hertford?

The answer isn’t as straightforward as a single number. It depends on your property, your chosen charger, and your electrical setup. In this guide, we’ll break down the true cost of installing an EV charger in Hertford — including what affects pricing, what’s included, and how to make the most of your investment.

Whether you live in Hertingfordbury, Bengeo, or near Ware Road, this guide is for you.

Why Install a Home EV Charger in Hertford?

Although Hertford has seen a rise in public charge points — especially near car parks and supermarkets — they’re still few and far between for the growing number of EV owners. With local streets often fully parked and limited on-street charging infrastructure, the most reliable and cost-effective option is to charge from your own driveway or garage. Home EV charging gives you:

• Control – Charge when it suits you
• Speed – Up to 10x faster than a 3-pin plug
• Savings – Use smart tariffs to reduce charging costs
• Convenience – No queuing or waiting for public points

And over time, the investment can more than pay for itself — especially with today’s fuel prices.

So, What’s the Cost?

Typical Installation Price in Hertford - £999 to £1,200, including:

• A high-quality smart charger (e.g. Hypervolt, Ohme, Zappi)
• Standard installation
• Surge protection device (SPD)
• Electrical testing and NICEIC/NAPIT certification
• App setup and walkthrough
• Local aftercare

But this is the base price. Let’s break down what can increase or decrease the final cost.

Key Factors That Affect EV Charger Cost in Hertford

1. Charger Type

Tethered chargers (with cable) tend to cost slightly more than untethered units. Brands like Hypervolt and myenergi Zappi also carry a premium due to advanced features or solar integration. Typical price range for charger hardware alone:

• Basic smart charger: £450–£600
• Premium charger (e.g. Zappi with solar compatibility): £750–£950

2. Location of Consumer Unit to Charger

If your consumer unit (fuse board) is near your driveway or garage, you’re in luck — minimal wiring means a faster, more affordable install. Longer cable runs (e.g. from a consumer unit at the rear of the house to a front drive) add to labour time and material costs. In areas like Bengeo and Sele Farm, we often see longer runs due to older layouts or side driveways — which may slightly increase cost.

3. Condition of Existing Electrics

If your existing fuse board is outdated or full, it may need to be upgraded to safely accommodate the EV charger. Or we maybe able fit a separate EV dedicated 18th addition consumer unit to keep cost down

At JJB EV, we include surge protection devices (SPDs) in every install as standard — giving you an added layer of safety and compliance with the latest regulations. Potential upgrades might include:

• Additional Consumer unit: £250–£450
• Installation of earth rods (for TT systems): £80–£120
• New RCDs/MCBs: £30–£80

We’ll always carry out a full inspection during the home survey and give you a transparent quote upfront.

4. Groundworks or Special Cable Routing

Occasionally, chargers need to be installed in detached garages or at the bottom of long driveways — such as in some Hertingfordbury or Bayford properties. In these cases, armoured cable might need to be laid underground or clipped externally. These installs might add £100–£300, depending on complexity.

5. Smart Features & App Integration

Chargers like Ohme ePod and Zappi offer deep app integration, allowing you to:

• Schedule charges for cheaper off-peak rates
• Monitor energy usage
• Integrate with solar or battery storage
• Adjust charging remotely

The initial setup and walkthrough are included in our price — but choosing these premium features adds value, not just cost.

What About OZEV Grants — Are They Still Available?

As of 2022, the £350 OZEV grant is no longer available to homeowners in single-unit houses. However, if you live in a:

• Flat (owner-occupied or rented)
• Rental property (as a landlord)

You may still be eligible for government support. Unfortunately, most Hertford homeowners no longer qualify — but we’ll check eligibility during your quote just in case.

Cost Comparison: Home Charging vs. Public Charging in Hertford

Let’s say you drive 10,000 miles per year in your EV.

Home Charging (Smart Tariff e.g. Octopus Go)

• 5p per mile.
• Annual cost: £500

Public Rapid Chargers

• 60p per kWh (~15p per mile)
• Annual cost: £1,500

That’s £1,000 saved every year by charging at home — meaning most Hertford residents recover the full cost of their charger within 12–18 months.

How Long Does Installation Take?

In most cases, installation takes half a day. If additional works are needed (e.g. fuseboard upgrade or groundworks), it may take slightly longer. Our process:

• Contact us – Call 01992 276121 or enquire online
• Home survey – We check electrics, cable runs, charger location
• Clear quote – Fixed pricing, no pressure
• Installation – Usually completed in a single visit
• Demonstration – We show you how to use your charger and app

We cover all areas of Hertford including Bengeo, Foxholes, Ware Road, and nearby villages.

What’s Included with JJB EV?

• High-quality smart charger
• Part P compliant installation
• NAPIT-certified electricians
• Surge protection included as standard
• Local aftercare and fast response
• Friendly, trustworthy service from a Which? Trusted Trader

Our team understands the specific needs of Hertford homes — from older properties with dated fuseboards to new-builds with tight meter cupboards. We’ve seen it all.

Ready to Get Started?

Installing an EV charger at home isn’t just about convenience — it’s about making a smart investment in your property, your lifestyle, and your long-term savings.

If you're in Hertford and ready to make the switch to home charging:

Call JJB EV Charger Specialists on 01992 276121
Or get your instant quote at jjb-electrical.co.uk/ev 

Let’s make charging your EV at home simple, safe, and future-proof.